The Minut mobile app is available on iOS and Android. It is the primary tool for installing sensors, receiving real-time alerts, managing stays, and configuring your rental units on the go. This article walks through every section of the app so you know where to find what you need.
Download on the App Store
Get the app on Google Play
Web app vs mobile app. Some tasks are better suited to the web app at web.minut.com: including plan and billing management, portfolio-wide reports, bulk unit editing, and integrations. Most monitoring, sensor installation, and day-to-day management is done from the mobile app. Both use the same account and stay in sync.
Bottom navigation
The app has five tabs along the bottom of the screen. These are the main sections you’ll navigate between during everyday use.
Dashboard | Properties | Inbox | Tasks | Settings |
Live overview of events and alerts | All rental units | Guest messages and conversations | Cleaning and maintenance taks | Organisation, presets and notifications |
Dashboard
Your live portfolio overview
First tab: it opens by default when you launch your app.
The Dashboard shows a real-time summary of everything happening across your properties. Any active event; noise alerts, sensor issues, occupancy changes;appear here so you can respond quickly without opening each rental unit individually.
Active events | noise alerts, smoking events, crowd detect, and security alarm triggers currently requiring attention |
Device issues | sensors showing as offline or low battery, with a link to each affected unit |
To-dos | outstanding actions such as unused prepaid credits and units waiting for sensor installation |
Occupancy status | which units currently have guests present based on stay data and motion detection |
Tap any item in the Dashboard to open a detailed view of that event or unit. A red dot on a rental unit means there’s an unreviewed event. This clears once you open the unit’s event log.
Properties
All your rental units
Second tab: your full property list.
The Properties tab shows every rental unit in your organisation. At a glance you can see which units have noise monitoring or the security alarm active, and which have unreviewed events (shown with a red dot).
Use the search bar at the top to find a specific unit by name
Tap the + icon in the upper right to create a new rental unit
Tap any unit to open its detail view
If you manage properties across multiple locations or buildings, these groupings are reflected in the Properties list.
Rental unit detail view
Tapping a rental unit opens its detail view: the main control centre for that property. From here you can see live sensor data, manage stays, control monitoring features, and access settings.
What you can do from a rental unit: top any unit in the Properties tab top open this view:
Monitoring toggles: turn noise monitoring, crowd detect, smoking detection, and the security alarm on or off with a single tap
Live sensor readings: current noise level (dB), temperature, humidity, and occupancy status
Event log: full history of all events for this unit, filterable by type
Stays:
view upcoming and current stays, add stays manually, or connect a booking platform.
at the bottom of the unit view to manage
Devices: all sensors installed in this unit
Unit settings: tap the settings icon in the top right corner
Rental unit settings
Tap the settings icon (⚙) in the top right corner of any rental unit to open its settings. These control everything specific to that property.
Setting | Location | What it does |
Name & address | Unit settings | Edit the display name and property address |
Location/ builting | Unit settings | Assign the unit to a location or building group (Pro plan) |
Noise monitoring preset | Unit settings | Assign a noise preset to define thresholds and quiet hours for this unit |
Guest communication | Unit settings | Configure automated messages sent to guests at check-in, check-out, and noise events |
Silent alarm | Unit settings | Receive alerts without triggering the audible siren at the property |
Scheduled alarm | Unit settings | Automatically activate and deactivate the alarm at set times |
Delete rental unit | Unit settings( scroll to bottom) | Permanently removes the unit and all its data. Cannot be undone. |
Devices
Sensors installed in a rental unit
Found within the rental unit detail view
The Devices section of a rental unit lists all sensors currently installed in that property. For each device you can see:
Stay status
Status (on/ off) of noise, occupancy, smoking, temperature and alarm monitoring
Tap any device to open its individual settings- including thresholds, sensitivity, and device-level controls.
To add a new sensor to the unit, tap the + icon in the upper right corner of the Devices section and follow the in-app installation steps.
To remove a sensor, tap the device, tap the settings icon, and scroll to Delete sensor.
Inbox
Guest messages and conversations
Third tab: unified messaging across all rental units
The Inbox is where you manage all guest-facing communication. Automated messages triggered by noise events, check-in, and check-out appear here alongside any replies from guests.
View all automated messages sent to guests and their replies
Send manual messages to current guests directly from the app
Filter conversations by rental unit to focus on a specific property
Messages sent via the OTA/ PMS integration appear here with the channel label
To configure what automated messages are sent and when, go to the unit settings and tap Guest communication.
Tasks
Cleaning and maintenance task management
Fourth tab: available to all roles
The Tasks tab manages cleaning and maintenance tasks across your portfolio. Tasks can be created manually or triggered automatically for example, a cleaning task generated after every checkout.
View all open, in-progress, and completed tasks across your properties
Create manual tasks and assign them to a team member
Set up automated turnover tasks that trigger at checkout
Team members with the Operator role can access Tasks without seeing any sensor data or monitoring features
Settings
Organisation- wide configuration
Fifth tabs- Admin access required for most options
The Settings tab contains all organisation-level configuration - separate from individual rental unit settings. Most options here require Admin access.
Organisation: view and edit organisation name, manage members, assign roles, and access Sensor Swap settings
Monitoring presets: create and manage noise presets that can be applied across multiple rental units.
Notifications: control which types of alerts trigger push notifications on your device and manage notification preferences per rental unit
Integrations: connect Airbnb, your PMS, smart locks, and other third-party tools
Call Assist: activate or manage the Call Assist add-on for 24/7 noise resolution.
Account and organisations
Your personal account details
Tap your profile icon in the top left corner of the app
Change your name, email, or password
Switch between organisations: if you belong to more than one organisation, they are listed here. Tap any organisation to switch context.
Create or join an organisation: add a new organisation or accept an invitation from the same menu
Log out
Plan, billing, and invoices are not in the mobile app. To manage your subscription, update your payment method, or download invoices, go to the web app at web.minut.com/billing.