Skip to main content

AC Power Adapter

Permanently power your Minut M3 sensor through a hardwired connection to a junction box: no batteries, no charging. Installation must be done by a certified electrician.

Written by Emilie Pain

The Minut AC Power Adapter kit hardwires your Minut M3 sensor into a junction box for continuous 24/7 power. It is not designed for a standard wall socket: the adapter connects through a terminal block directly to the building's electrical wiring. It replaces the standard magnetic mounting plate with a larger bracket that holds the adapter and routes the cable neatly, so you never need to take the sensor down to charge it.

This adapter must be hardwired into a recessed junction box by a certified electrician. It is not intended for a standard wall socket or extension cable, and installation may be subject to local electrical regulations.

What's in the box

Item

Details

AC Power Adapter

80–240V AC input via terminal block. 5V 500mA USB-A output. 35 × 37 × 23 mm.

Mounting bracket

108 mm diameter / 99 mm square. Fits standard EU/US ceiling junction boxes, or mounts directly to a structural surface.

USB cable

200 mm, USB-A to USB-C. Connects the adapter output to the USB-C charging port on the Minut M3 sensor.

Mounting screws

For securing the bracket to a ceiling junction box or structural surface.

Specifications

Input

80–240V AC, 50–60 Hz, terminal block. Double insulated; no protective earth (PE) needed.

Output

5V DC, 500mA, USB-A port

Adapter dimensions

35 × 37 × 23 mm

Mounting bracket

108 mm diameter / 99 mm square. Fits standard EU/US ceiling junction boxes.

USB cable

200 mm, USB-A to USB-C. Minut M3 sensor only.

Network

The sensor keeps using Wi-Fi. No change to network connectivity.

Why 500mA is enough: the adapter keeps the sensor powered continuously, so it doesn't need the faster 12.5 W charger recommended for recharging a flat battery.


When to use the Minut AC Power Adapter

Use the Minut AC Power Adapter when a certified electrician can wire an accessible junction box near the mounting location, and Wi-Fi is reliable at the unit.

Best for

Apartments, short-term rental units and hotel rooms with an accessible junction box, where charging batteries is impractical and hardwiring is possible.

Network

The sensor keeps using Wi-Fi; the adapter provides power only. If you need wired power and a wired network connection, use the Minut PoE Adapter instead.

Installation

The USB cable is 200 mm (about 20 cm). Plan the mounting position so the adapter sits within 20 cm of the sensor: inside the ceiling void, in the junction box, or surface-mounted next to the bracket using cable trunking.

  1. Choose the mounting location
    Pick a ceiling or wall location with an accessible junction box. The bracket fits standard ceiling junction boxes or can be screwed directly into a structural surface. Installation must be done by a certified electrician and may be subject to local electrical regulations.

  2. Mount the bracket
    Secure the mounting bracket to the junction box or structural surface with the included screws and a flathead screwdriver.

  3. Connect the adapter
    Have a certified electrician wire the adapter's terminal block to the junction box's electrical supply. Connect the USB-A to USB-C cable from the adapter's output port to the USB-C port on the side of the Minut M3 sensor.
    The sensor turns on automatically once the USB-C cable is connected.

  4. Pair the sensor in the Minut app
    Tap Properties and select the unit, then tap + in the Devices section and select Minut M3. Once the sensor glows purple (setup mode), tap Continue, connect it to your 2.4 GHz Wi-Fi network and select Indoor mode to finish pairing.
    ​This mode setting is permanent and can't be changed after installation.

  5. Attach the sensor
    Snap the Minut M3 sensor onto the mounting bracket. It attaches magnetically, the same way as on the standard plate. Check that the sensor shows a green light and is online in the Minut app.
    ​Green light = online and monitoring.

Already have the sensor installed? Use Sensor Swap to move its settings and data to the newly wired sensor without a full reinstall.

Battery protection mode

When the Minut M3 sensor is permanently connected to AC power, it automatically switches to battery protection mode. It holds the battery slightly below full to avoid long-term wear from continuous charging. This is normal.

What you may notice

The battery level in the app may show 80–90% rather than 100%, even while permanently powered.

Is monitoring affected?

No. All features work normally.

Low battery alerts

Won't trigger for a permanently wired sensor.

Compatibility

Compatible sensors

Minut M3 sensor only.

Indoor only

For indoor installations only. Permanent wiring is not recommended for sensors in outdoor mode.

Purchase

Available at store.minut.com. Select the AC Power Adapter kit at checkout.

Did this answer your question?