Connect Minut with SmartThings to give your guests their access code automatically. Minut uses the stay dates to share the code before check-in, and guests can lock and unlock the door from the Guest App during their stay.
Where to connect: all integrations are connected in the web app at web.minut.com → Integrations. Smart lock integrations are available on the Starter, Standard and Pro plans.
Create a seamless welcome by letting your guests self check-in with SmartThings.
Before you start
A Minut account on the Starter, Standard or Pro plan
A SmartThings account with your locks set up
A booking connection (a PMS or Airbnb) or reservations added in Minut, so Minut knows the stay dates
Connect Minut with SmartThings
Go to the Integrations menu in the web app.
Select the SmartThings integration and click Connect. Follow the instructions on screen to connect your SmartThings account.
Link your units to locks
Link each SmartThings lock to the corresponding Minut unit in the SmartThings integration settings. Only linked units share access codes with guests.
Each lock can be linked to one unit, and each unit to one lock.
Only locks that can be programmed with online access codes can be linked. Other devices may be listed but cannot be selected.
When you link a lock, Minut creates codes for the upcoming stays in that unit. If you unlink it, those codes are removed.
Access codes and the Guest App
Once a unit is linked to a lock, Minut provides your guests with an access code for their stay. Codes are tied to the stay dates and expire at check-out. In the SmartThings app, each code is labelled with the unit name and the guest's name, for example "Apt 2 · Jane Doe". Unit names longer than 24 characters are shortened.
If a reservation's dates change, Minut keeps the same code where possible and updates its dates, so the guest does not need a new PIN. If the lock does not allow this, Minut creates a new code for the new dates before removing the old one, so there is no gap in access.
What guests get
An automated SMS with their access code shortly before the stay starts
The code in the Guest App, where they can also lock and unlock the door during their stay
Lock access in the Guest App is only available within the stay window, and only if the lock supports remote lock and unlock.
Set a guest's code yourself
Codes are generated automatically, but you can set or edit a code for a specific guest from the reservation in Reservations. See The Guest App: overview for Hosts.
Turn off lock access in the Guest App
Lock access is on by default. To turn it off, go to Reservations → Settings → Guest app and turn off the Smart locks toggle.
Messages to guests
Add the access code to your messages with the access code shortcode, and include it in your check-in instructions. Set up check-in, check-out and other scheduled messages in Guest Journey, and noise alert messages in your Noise Preset. Replies to messages appear in your Inbox. For an overview, see Messaging.
Disconnect
To disconnect SmartThings, open Integrations in the web app, select SmartThings and disconnect it.
If you only need to fix a connection problem, use Reconnect instead. It keeps your settings and unit links (see Troubleshooting below).
Troubleshooting
Minut asks you to reconnect
Open Integrations, select SmartThings and click Reconnect. You will be asked to log in to SmartThings again. Do this too if Minut cannot list your locks or shows a credentials error.
Reconnecting keeps your settings and unit links, so do not disconnect first.
Your lock is not listed
Make sure the lock is set up in your SmartThings account, then go back to Minut and try again. Make sure you logged in to the SmartThings account that owns the lock. Only locks that support online access codes can be linked.
A guest did not receive their access code
Check that the unit is linked to the lock, that the stay exists in Minut with check-in and check-out dates, and that the message includes the access code shortcode. Also check that the stay has a guest phone number, since the code is sent by SMS.
A guest cannot lock or unlock from the Guest App
Lock access only works during the stay, so guests cannot use it before check-in or after check-out. Also check that the Smart locks toggle is on in Reservations → Settings → Guest app.
While you investigate, ask the guest to use a physical key or another way in if they have one.
If none of this helps, contact our support team at hello@minut.com and tell us which unit is affected, the guest's name and stay dates, and include a screenshot of the lock on the integration page.


