Skip to main content

Ultraloq

Connect your Ultraloq smart lock to Minut to automatically share access codes with guests and let them lock/unlock from the Guest App.

Written by Emilie Pain

Connect Minut with Ultraloq to give your guests their access code automatically. Minut uses the stay dates to share the code before check-in, and guests can lock and unlock the door from the Guest App during their stay.

Where to connect: all integrations are connected in the web app at web.minut.com → Integrations. Smart lock integrations are available on the Starter, Standard and Pro plans.

Ultraloq logo

Create a seamless welcome by letting your guests self check-in with Ultraloq.


Before you start

  • A Minut account on the Starter, Standard or Pro plan

  • An Ultraloq account with your locks set up

  • A booking connection (a PMS or Airbnb) or reservations added in Minut, so Minut knows the stay dates


Connect Minut with Ultraloq

  1. Go to the Integrations menu in the web app.

    The Integrations page in the Minut web app
  2. Select the Ultraloq integration and click Connect. Follow the instructions on screen to connect your Ultraloq account.


Link your units to locks

Link each Ultraloq lock to the corresponding Minut unit in the Ultraloq integration settings. Only linked units share access codes with guests.

  • Each lock can be linked to one unit, and each unit to one lock.

  • Only locks that can be programmed with online access codes can be linked. Other devices may be listed but cannot be selected.

  • When you link a lock, Minut creates codes for the upcoming stays in that unit. If you unlink it, those codes are removed.


Access codes and the Guest App

Once a unit is linked to a lock, Minut provides your guests with an access code for their stay. Codes are tied to the stay dates and expire at check-out. In the Ultraloq app, each code Minut creates is labelled with the unit name and the guest's name, for example "Apt 2 · Jane Doe"; the unit name is shortened to 24 characters.

If a reservation's dates change, Minut keeps the same code where possible and updates its dates, so the guest does not need a new PIN. If that isn't possible, Minut creates a new code for the new dates before removing the old one, so there is no gap in access.

What guests get

  • An automated SMS with their access code shortly before the stay starts

  • The code in the Guest App, where they can also lock and unlock the door during their stay

Lock access in the Guest App is only available within the stay window, and only if the lock supports remote lock and unlock.

Set a guest's code yourself

Codes are generated automatically, but you can set or edit a code for a specific guest from the reservation in Reservations. See The Guest App: overview for Hosts.

Turn off lock access in the Guest App

Lock access is on by default. To turn it off, go to Reservations → Settings → Guest app and turn off the Smart locks toggle.


Messages to guests

Add the access code to your messages with the access code shortcode, and include it in your check-in instructions. Set up check-in, check-out and other scheduled messages in Guest Journey, and noise alert messages in your Noise Preset. Replies to messages appear in your Inbox. For an overview, see Messaging.


Disconnect

To disconnect Ultraloq, open Integrations in the web app, select Ultraloq and disconnect it.

If you only need to fix a connection problem, use Reconnect instead. It keeps your settings and unit links (see Troubleshooting below).


Troubleshooting

Minut asks you to reconnect

Open Integrations, select Ultraloq and click Reconnect. You will be asked to log in to Ultraloq again.

Reconnecting keeps your settings and unit links, so do not disconnect first.

Your lock is not listed

Make sure the lock is set up in your Ultraloq account, then go back to Minut and try again. Make sure you logged in to the Ultraloq account that owns the lock. Only locks that support online access codes can be linked. If a lock was only just added, try again a little later.

A guest did not receive their access code

Check that the unit is linked to the lock, that the stay exists in Minut with check-in and check-out dates, and that the message includes the access code shortcode. Also check that the stay has a guest phone number, since the code is sent by SMS.

A guest cannot lock or unlock from the Guest App

Lock access only works during the stay, so guests cannot use it before check-in or after check-out. Also check that:

  • the Smart locks toggle is on in Reservations → Settings → Guest app

  • the lock supports remote lock and unlock

If none of this helps, contact our support team at hello@minut.com and tell us which unit is affected and what you see.

Did this answer your question?